Operating Instructions Chapter 1
C4000 Palletizer Std./Adv.
C4000 Fusion
8012249/YT69/2016-02-25 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 7
Subject to change without notice
About this document
1.4 Information depth
These operating instructions contain the following information on the C4000 safety light
curtain:
mounting
electrical installation
commissioning and configuration
care and maintenance
fault diagnosis and troubleshooting
part numbers
conformity and approval
Planning and using protective devices such as the C4000 also require specific technical
skills which are not detailed in this documentation.
When operating the C4000, the national, local and statutory rules and regulations must be
observed.
General information on accident prevention using opto-electronic protective devices can
be found in the brochure “Safe Machines with opto-electronic protective devices”.
Please refer also to the SICK homepage on the Internet at www.sick.com.
Here you will find information on:
sample applications
connection diagrams
CAD drawings
CAD dimensional model
these operating instructions in different languages for viewing and printing
certificates on the prototype test, the EU declaration of conformity and other documents
1.5 Abbreviations
Application diagnostic output = configurable signal output that indicates a specific status
of the protective device
SICK Configuration & Diagnostic Software = software for the configuration and diagnostics
of the C4000 safety light curtain
External device monitoring
Enhanced function interface = safe SICK device communication
Electro-sensitive protective equipment (e.g. C4000)
Output signal switching device
Note
ADO
CDS
EDM
EFI
ESPE
OSSD
To Next Page
Loading...
