SICK C4000 Fusion

To Next Page

To Previous Page

Chapter 1 Operating Instructions

C4000 Palletizer Std./Adv.

C4000 Fusion

Subject to change without notice

About this document

1 About this document

Please read this chapter carefully before working with the documentation and the C4000

Palletizer or the C4000 Fusion, also referred to in the following as C4000 for short.

1.1 Function of this document

These operating instructions are designed to address the technical personnel of the

machine manufacturer or the machine operator in regards to safe mounting, installation,

configuration, electrical installation, commissioning, operation and maintenance of the

C4000 safety light curtain.

These operating instructions do not provide instructions for operating machines on which

the safety light curtain is, or will be, integrated. Information on this is to be found in the

appropriate operating instructions for the machine.

1.2 Target group

These operating instructions are addressed to planning engineers, machine designers and

operators of plants and systems which are to be protected by one or several C4000 safety

light curtains. It also addresses people who integrate the C4000 into a machine, initialise

its use, or who are in charge of servicing and maintaining the device.

1.3 Scope

These operating instructions apply to the C4000 Palletizer or C4000 Fusion safety light

curtain with the following entry on the type label in the field Operating Instructions:

 8012246

 8012246/TE44

 8012246/TG79

 8012246/YT69

This document is part of SICK part number 8012246 (operating instructions “Safety Light

Curtain C4000 Palletizer Standard/Advanced/C4000 Fusion” in all available languages).

These operating instructions are original operating instructions.

For the configuration and diagnostics of these devices you require CDS (Configuration &

Diagnostic Software) version 3.6.1 or higher. To check the version of the software, on the

? menu select Info....

Note

Related product manuals