SICK C4000 Fusion

Operating Instructions Chapter 7
C4000 Palletizer Std./Adv.
C4000 Fusion
8012249/YT69/2016-02-25 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 75
Subject to change without notice
Electrical installation
7.2 Configuration connection M8× 4 (serial interface)

Pin  Sender/ Receiver PC-side RSL232LDLSub
1 Not assigned
2 RxD Pin 3
3 0 V DC (voltage supply) Pin 5
4 TxD Pin 2
The pin assignment of sender and receiver is identical.
 After configuration always remove the connecting cable from the configuration
connection!
 After the configuration of the device has been completed, locate the attached
protection cap to cover the configuration connection.
Fig.
48
:
Pin assignment of
the configuration connection
M8
 × 4
Tab.
19
:
Pin assignment of
the configuration connection
M8
 × 4
Notes
4
2
3
1