SICK C4000 Fusion

Operating Instructions Chapter 2
C4000 Palletizer Std./Adv.
C4000 Fusion
8012249/YT69/2016-02-25 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 9
Subject to change without notice
On safety
2 On safety
This chapter deals with your own safety and the safety of the equipment operators.
 Please read this chapter carefully before working with the C4000 or with the machine
protected by the C4000.
2.1 Qualified safety personnel
The C4000 safety light curtain must be installed, connected, commissioned and serviced
only by qualified safety personnel. Qualified safety personnel are defined as persons
who …
 due to their specialist training and experience have adequate knowledge of the power-
driven equipment to be checked
and
 have been instructed by the responsible machine owner in the operation of the machine
and the current valid safety guidelines
and
 are sufficiently familiar with the applicable official health and safety regulations, direc-
tives and generally recognized engineering practice (e.g. DIN standards, VDE stipula-
tions, engineering regulations from other EU member states) that they can assess the
work safety aspects of the power-driven equipment
and
 have access to these operating instructions and who have read them.
As a rule these are qualified safety personnel from the ESPE manufacturer or also those
persons who have been appropriately trained at the ESPE manufacturer, are primarily
involved in checking ESPE and are allocated the task by the organisation operating the
ESPE.