SICK DUSTHUNTER T User Manual

Start-up and Parameter Settings
DUSTHUNTER T · Operating Instructions · 8012428 V 2.0 · © SICK MAIHAK GmbH Germany 71
4.4.6 Setting the response time
Select the "Configuration / Value Damping“ directory to set the response time.
Figure 55 "Configuration / Value Damping“ directory
Oygen Source Constant Value A fixed value is used to calculate the scaled value.
This parameter opens the "Constant Oygen" field to enter the scaling value in %.
Analog Input 4 The value from an external sensor connected to analog input 4 (standard scope of delivery) is
used to calculate the scaled value.
This parameter opens the "Analog Input 4 -Oxygen" field to set the parameters for the lower
and upper range limit values.
Basic analog
input settings
Live Zero Lower measuring range limit
Max. current Upper measuring range limit
Field Parameter Remark
Field Parameter Remark
Damping time
for Sensor 1
Value in s Response time for the selected measured variable (
→ p. 15, §2.1.2)

SICK DUSTHUNTER T Specifications

General

Brand	SICK
Model	DUSTHUNTER T
Category	Measuring Instruments
Language	English