COMMISSIONING 6
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
6.5.2 Displaying the measurement site
The Site register is divided into two.
• The navigation area on the right-hand side contains all the system functions that have
to be adapted to the measurement site. These are all functions that are connected to a
system component.
The system functions are displayed in a hierarchical structure:
Lane
System function
System components.
The lower section lists plug-ins for selecting and configuring the recorded measured
values, vehicle data, and status information.
• The view on the left-hand side shows the measurement site with the road, lane(s), and
direction of travel, along with the system components, the installation site, and the
status display.
During operation, this is where the vehicles detected by the profiling system are
displayed as a live 3D model in TEMS Manager.
The raw measurement data supplied by the 2D LiDAR sensors can also be displayed
here.
To Next Page
Loading...