SICK TIC102 master

COMMISSIONING 6
93
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
6.4 Setting up the site configuration with the wizard
A wizard is used to help you select system functions. The selected system functions can
then be adjusted to the measuring site in the next step.
Launching the wizard
Start the wizard for selecting the site configuration on the start page.
▸
Click on Set up site configuration with the wizard. The site configuration wizard
opens.
The summary on the left-hand side shows the pages of the wizard that must be
completed depending on the components selected. When you have completed
configuration on one of these pages, it will be marked with a tick.
On the right-hand side, settings are adjusted for the page selected. As no site
configuration has been created yet, the New site option is highlighted.
Click Next to switch to the next page of the wizard.
Note
On a smaller screen, the summary area appears above the input area.