SICK TIC102 master

ELECTRICAL INSTALLATION 5
75
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
The TIC102 Slave has the following connections:
Fig. 79: Connections – TIC102 Slave
No.
Connection
Designation
(in diagram)
Description
1
PWR
-X1
Connection to the voltage supply
2
ETH_INTERNAL
-X2
Ethernet connection to the TIC102 Master or
another TIC102 Slave
3
ETH_INTERNAL
-X3
Ethernet connection to the TIC102 Master or
another TIC102 Slave
Tab. 9: Connections – TIC102 Slave
5.2.2 Connections to LMS511 2D LiDAR sensor
The LMS511 2D LiDAR sensor has the following connections:
Fig. 80: Connections – LMS511
No.
Connection
Description
1
Ethernet
Ethernet connection to a switch
2
I/O
Not assigned
3
Data
Not assigned
4
Power
Connection to the voltage supply
Tab. 10: Connections – LMS511
TIC102 slave