COMMISSIONING 6
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
▸
Click on the plus icon in the line below and extend the site to include the required
number of slaves.
You can use the minus icon to delete selected system functions from the site
configuration.
6.4.2 Selecting axle counting
On the Select axle counting side, you can extend the site configuration to include the
Axle Detector system function.
▸
Click on the plus icon and define the number of system functions used.
A site configuration can be assigned a maximum of two Axle Detector system functions.
If your site configuration does not provide for axle counting, change directly back to the
next wizard page using Next.
Note
To Next Page
Loading...