SICK TIC102 master

ANNEX 9
205
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
9.6.2 Usage from Windows Command Line
1. Start the Windows Command Line and go to the installation directory of the TEMS
Manager software (default installation path: C:\Program Files\SICK\TEMS Manager).
In 64 bit systems, the path will look as follows: C:\Program Files (x86)\SICK\TEMS-
Manager.
2. In order to see the available commands in the help screen, type
Ectn.Tems.TemsManagerCmd.exe /?.
3. For example, in order to connect to a TEMS Recorder with serial number 91234567
you can use
Ectn.Tems.TemsManagerCmd.exe /discover=91234567.