6 COMMISSIONING
8017768/12AX/2019-05-31|SICK
OPERATING INSTRUCTIONS | TIC
Subject to change without notice
6.10 Updating the TEMS Recorder and packages
6.10.1 Displaying information on the TEMS Recorder
During operation, information on the TEMS Recorder can be displayed and analyzed in
TEMS Manager. In addition to general data and information on the IP configuration, you
can also check other data here, including the UTC (Universal Time Coordinated) time
setting.
Upon delivery, the Traffic Controller always uses UTC time as the reference time. The local
web browser and the TEMS Analyzer then convert the UTC times into local time for the
displays.
▸
Go to the TEMS Manager menu bar and switch to the Info Info workspace.
Note
To Next Page
Loading...