6 COMMISSIONING
8017768/12AX/2019-05-31|SICK
OPERATING INSTRUCTIONS | TIC
Subject to change without notice
6.6.8 Configuring plug-ins
TEMS Manager includes a range of plug-ins for processing the recorded vehicle data. The
following plug-ins can be selected and configured as standard: CSV Export, Disk Storage,
FTP Storage, and UNC Storage (see also chapter 3.5.3 Plug-ins for saving and
downloading the vehicle data). Only a few settings are required for the configuration
process.
Adding plug-ins
1. Click on the Add plug-in link in the navigation area.
2. A list of all available plug-ins opens.
3. Click on the required plug-in in the list; it is then applied to the navigation area.
A plug-in can be configured using the gear icon Show Details.
To Next Page
Loading...