COMMISSIONING 6
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
CSV Export
The CSV Export plug-in saves the vehicle data obtained to a csv file, which is located
inside the /lists directory. A separate data set is created in the csv file for each vehicle.
As part of this process, you can also specify the period to be covered by a file. Usually,
a csv file contains the vehicle data for a particular day.
▸
Open the detail window for the CSV Export plug-in.
The following parameters usually play a key role in determining the output structure of the
csv file:
Determines whether measured values are identified for one lane, more than
one lane, or for several lanes in conjunction with the axle counting function.
Defines the number format to be used.
Defines the time stamp for the measurement results when exported to the
csv file.
Disk Storage
The Disk Storage plug-in stores each detected vehicle in a separate file using the vehicle
file format. The vehicle file is placed in the /data directory. The vehicle file contains all the
information recorded for a vehicle.
▸
Open the detail window for the Disk Storage plug-in.
Where necessary, specify the directory and file names. You do not have to configure any
of the other parameters.
To Next Page
Loading...