ABOUT THESE OPERATING INSTRUCTIONS 1
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
1 About these operating instructions
Please read this chapter carefully before you begin working with this documentation and
the Telematic Information Collector (TIC for short).
1.1 Described software versions
Profiling software for recording and processing
measurement data
Tab. 1: Software versions
1.2 Purpose of this document
These operating instructions are designed to give technical personnel instructions on
the safe mounting, configuration, electrical installation, commissioning, operation, and
maintenance of the TIC profiling system.
These operating instructions do not provide information on operating the customer
system into which the TIC profiling system has been or is going to be integrated. More
information on this can be found in the customer documentation.
1.3 Target group
These operating instructions are intended for persons integrating the Traffic Information
Collector into a system and performing initial commissioning and operation.
They are also intended for the planners and integrators of the customer system, as well as
the operating entity with responsibility for it.
Entity operating the customer system
Operating the system: site view and display of the measurement
results in TEMS Manager
The system user reports faults to the system manager.
Mounting, electrical installation, maintenance, and replacement
of system components.
The system manager submits support requests to SICK.
Commissioning, configuration, and support.
Tab. 2: Target group
To Next Page
Loading...