SICK TIC102 master

MAINTENANCE 7
159
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
7 Maintenance
7.1 Overview of maintenance tasks
In general, the system components are maintenance-free.
All 2D LiDAR sensors installed in the devices feature an integrated contamination
monitoring function. The optical surfaces of the 2D LiDAR sensors are subject to certain
maintenance intervals.
The following maintenance work must be carried out at the specified time intervals:
Component
Maintenance task
Interval *
Design
2D LiDAR
sensor
Cleaning the inspection
window
 In the event of a
contamination
message: as soon as
possible
 Aside from this:
As and when required
System
manager
General
Visually inspect the
electrical cabling
and wiring for damage
1x/year
System
manager
* The intervals depend on the ambient conditions and degree of contamination. In addition,
the intervals must be defined according to how important they are for the customer process.
Tab. 24: Maintenance intervals