SICK TIC102 master

SYSTEM DESCRIPTION 3
59
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
3.7 Status indicators
3.7.1 TIC102 status indicators
The status indicators for the LMS111 installed in the TIC102 housing are located in the
recesses of the housing. The 2D LiDAR sensor is fully automated in normal operation
and requires no operator intervention. The LEDs (1) signal the operational status of the
2D LiDAR sensor.
Fig. 63: Status indicators – TIC102 (LMS111)
Display
Meaning
2D LiDAR sensor in operation, no evaluation cases are reporting an event
2D LiDAR sensor in operation, at least one evaluation case reports an event
Optics cover is dirty
Switching output switched
2D LiDAR sensor in teach-in mode
Tab. 5: Status indicators – TIC102
The status indicators of the Traffic Controller installed in the housing are not visible.
Note