ON SAFETY 2
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
2.3 Intended use
The TIC profiling system may only be used as described in section 2.2 Applications of the
system. It may only be used by qualified personnel in the environment in which it was
mounted and initially commissioned by qualified safety personnel in accordance with
these operating instructions.
The TIC is not a safety device for human protection and therefore does not comply with
any safety standards.
It is purely a measurement system without any safety functions and must only be used
in this capacity.
Consequently, any responsibility on the part of SICK is restricted to these defined and
limited properties of the measurement system.
If used in any other way or if alterations are made to the profiling system – including in
the context of mounting and installation – this will render void any warranty claims
directed to SICK AG.
Notes
Note
To Next Page
Loading...