SICK TIC102 master

3 SYSTEM DESCRIPTION
24
8017768/12AX/2019-05-31|SICK
OPERATING INSTRUCTIONS | TIC
Subject to change without notice
3.2.4 Components of the axle counting system function
The system function for axle counting (Axle Detector) extends the system functions for
vehicle detection and classification to include the option of automatically counting the
vehicle axes.
The system function consists of the LMS Axle system component. This system component
uses one LMS511 2D LiDAR sensor.
The Axle Detector system function can be operated together with one of the TIC102 or
TIC502 system functions.
Fig. 9: System components – Axle counting
Scope of delivery
Quantity
Part No.
Description
1-2
1091458
LMS511 SE 2D LiDAR sensor
Quantity
Part No.
Description
1-2 2056850
Protection hood, recommended for protection from direct
sunlight (heat) and environmental influences
1-2 2063050
Weather hood, recommended for protection from direct
sunlight (heat) and environmental influences
1-2
2015623
Mounting kit 1 (mounting kit 1 to assist with mounting)
1-2
2015624
Mounting kit 2 (mounting kit 2 to assist with mounting,
required mounting kit 1)
1-2
2015625
Mounting kit 3 (mounting kit 3 to assist with mounting,
requires mounting kit 1+2)
1-2
2059271
Mounting bracket (for retrofitting to existing LMS2x1 mounting)
1-2
2018303
Mounting kit (mounting kit for wall mounting (adjustment
bracket))
1-2
6050687
Voltage supply (20 m) connecting cable for the LMS511 SE
1-2
6045328
Ethernet cable (15 m) for connecting the 2D LiDAR sensors to
the TIC102
1-2
6050685
Ethernet cable (20 m) for connecting the 2D LiDAR sensors to
an Ethernet switch (for connection to the TIC502).
Accessories