6 COMMISSIONING
8017768/12AX/2019-05-31|SICK
OPERATING INSTRUCTIONS | TIC
Subject to change without notice
FTP Storage
The FTP Storage plug-in enables vehicle data to be uploaded to an FTP server
automatically. The data are not stored on the Traffic Controller.
▸
Open the detail window for the FTP Storage plug-in.
Set the following parameters to configure the FTP transfer:
FTP password for accessing the customer’s FTP server.
IP address of the customer FTP server to which the measurement
results are to be uploaded.
If the IP address is not in the same number range as the Traffic
Controller, the (correct) IP gateway must be set within the IP
The port via which the connection to the FTP server is to be established.
FTP user name granting access to the FTP server.
To Next Page
Loading...