SICK TIC102 master

COMMISSIONING 6
127
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
UNC Storage
The UNC Storage plug-in enables vehicle data to be saved in a UNC path automatically.
UNC paths allow a directory on the network to be accessed without the need for a drive
letter. The data are not stored on the Traffic Controller.
▸
Open the detail window for the UNC Storage plug-in.
Configure the UNC path as follows:
Parameters
Description
BasePath
Defines the network directory.
The network directory has to be shared so that it can be accessed.
UNCDomainName
UNCPassword
UNCUsername
A Windows user must have been granted write access to the shared
network directory.
If this user is not a domain user, the computer name must be entered
under the UNCDomainName parameter.
Example
\\SRV1\Vehicles\Road1
UncDomainName: SRV1
UncUserName: tems_user
UncPassword: sAfE_PassWord