COMMISSIONING 6
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
Adapting the graphic display
You can use the tools in your browser to adjust the view of the measurement site. In the
TEMS Manager graphical user interface (GUI), you can zoom in and out of the site, move
the view, and rotate it about the vertical and horizontal axes. To do this, you have to click
on the graphic interface.
Rotates the site clockwise or counterclockwise on the GUI when you press and
hold the left mouse button.
Moves the site up, down, right, and left when you press and hold the right
mouse button.
out
Enlarges or reduces the display of the site via the mouse wheel when the
mouse pointer is on the graphical display.
If you want to increase or decrease the zoom increments, press and hold the
Shift key at the same time.
Tab. 18: Functions for displaying the measurement site in TEMS Manager
Controlling the graphical display with touch gestures
If you are using a computer with a touchscreen, you can control the graphical display with
certain touch gestures. This involves swiping or dragging your fingers across the screen.
To zoom in, touch the graphical display with your thumb and index finger,
and spread them apart. This is called the “zoom gesture”.
To zoom out, touch the graphical display with your index finger and thumb,
and slide them together. This is called the “pinch gesture”.
Place your index fingers on the graphical display and drag them in the
desired direction to make the measurement site rotate accordingly.
To Next Page
Loading...