SICK TIC102 master

6 COMMISSIONING
152
8017768/12AX/2019-05-31|SICK
OPERATING INSTRUCTIONS | TIC
Subject to change without notice
Vehicle data
A series of messages are sent whenever a vehicle is detected by the profiling system.
TEMS Recorder
Direction
TEMS Info client
Message “Object Start”

Message “Object Stop”

Message “Vehicle Result”
or
Message “Vehicle Result
Extended”

Message “Object Location”
This message is sent once
while the vehicle is passing
through the measurement site.

Tab. 22: TEMS Info interface (messages: vehicle data)
Status messages
When “Status Messages” are activated, they are sent regularly by the Traffic Controller if
the status changes (provided that this has been configured).
TEMS Recorder
Direction
TEMS Info client
“Status” message

Tab. 23: TEMS Info interface (status messages)
Disconnecting
The connection is terminated when the TCP/IP connection is closed by either the TEMS
Info client or by the TEMS Recorder.