COMMISSIONING 6
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
3. Click Next to confirm your selection. On the second page, select the components for
vehicle detection. In the example, the configuration with two TIC502 is retained.
4. An LMS Detector system function is currently suggested on the third page.
5. Add another Axle Detector system function in the site configuration using the plus
icon, then click on Next.
6. In this example, you keep the category system settings.
7. End the wizard by clicking Create site. The site is extended to include an LMS Axle.
8. In 6.6.3 Configuring system functions for axle counting, you can read how to put an
additional axle counting system function into operation.
To Next Page
Loading...