SICK TIC102 master

3 SYSTEM DESCRIPTION
20
8017768/12AX/2019-05-31|SICK
OPERATING INSTRUCTIONS | TIC
Subject to change without notice
Master and slave
The TIC102 system function is available in the master and slave versions.
The housing of a TIC102 Master also contains the two LMS111 2D LiDAR sensors in
addition to the Traffic Controller. Only the two 2D LiDAR sensors are installed in a
TIC102 Slave. A TIC102 slave can only be operated together with a TIC102 Master or via
an external Traffic Controller as an OEM variant (see chapter 3.2.5 Traffic Controller FPS
as OEM variant). For more information on OEM variants, please contact your local SICK
agency.
Both housing variants contain an overcurrent protective device as well as a network
switch.
Fig. 5: System components – TIC102 Master/TIC102 Slave
Scope of delivery, TIC102
Quantity
Part No.
Description
1
1055102
TIC102 master
The TIC102 with 2 integrated LMS111-S05 2D LiDAR sensors,
integrated Traffic Controller TIC with TIC software and network switch.
USB stick with TEMS analyzer, TEMS info sample client, source code
for TEMS info sample client, and operating instructions
Quantity
Part No.
Description
1-3
1055104
TIC102 slave
TIC102 with two integrated LMS111-S05 2D LiDAR sensors
and network switch
Quantity
Part No.
Description
1-4
6045327
Connecting cable (30 m) for voltage supply
1
6045311
Ethernet cable (30 m) for connecting the TIC102 Master to the
company network
1-3
6045328
Ethernet cable (15 m) for connecting the two TIC102 units to each
other
Supplementary
components
Accessories