SIEB & MEYER CNC 61.00 - Layput Plan of the Output Stage 036050001.3

Functional Description of the Connectors/Interfaces
:
60 Hardware Description CNC 0610510/12 CNC 61.00
8.5 Layput Plan of the Output Stage 036050001.3
X20
X30
J9
J10
Designation Meaning Description
X30 power supply page 49
X20 motor phases page 48
X31/X32 switch-over for internal/external ballast resistor
wire bridge between X31 and X32 = internal ballast resistor active
wire bridge between X31 and X32 removed = external ballast resistor active
page 49
J9/J10 Adjustment of the ballast circuirt vie the jumpers J9/J10. The jumper can be accessed from the
back side of the device.
J9 plugged = internal ballast resistor (default state when devive is delivered)
J10 plugged = external ballast resistor
page 49
F3 fuse for the logic supply, 1 A semi time-lag fuse (0360510 SC + SF); 0.63 A semi time-lag fuse
(0360510 DC + DF + EC + EF).