:
Safety Instruction and Application Advice
Safety Instruction and Application Advice 9
2 Safety Instruction and Application Advice
2.1 General Information
According to Low-Voltage Directive 2006/95/EC
Machine Guideline 2006/42/EC
Electromagnetic Compatibility 89/336/EEC
Warning
In principle, the complete installation, the initial operation and the
maintenance must only be carried out by specialized staff!
Specialized staff, according to this fundamental safety instruction,
are persons, familiar with the installation, mounting, initial and per-
manent operation of the product and, are qualified appropriately for
the work. The standards DIN VDE 0100 and DIN VDE 0110 and
also the legal national rules for prevention of accidents must be paid
attention to.
Warning
During operation the devices can have hot surfaces according to
their protection system.
When ferrite rings are used temperatures may reach values over
80°C. Only use wires suitable for temperatures over 80°C. This
meets the flammability class UL 94V-0, RTI 105°C.
Consider the corresponding notes in the manual.
Warning
Subjects can be damaged and persons be injured
X when covers are removed illegally,
X during any improper use,
X when either the installation or the operation is incorrect.
Warning
Consult SIEB & MEYER before carrying out any modifications
within the unit.
Warning
Incorrect or insufficient connection of the system to ground may
cause dangerous currents.
To Next Page
Loading...
Need help?
General