3-11
Operation
the list of security conditions;
[custom message] is a custom
message entered using the CSG-M
Custom Software Generator (See the
CSG-M Programming Manual, P/N 315-
090381); [device type] is the type of
device which reported the security
condition.
Viewing the List of Security Conditions
To see the security condition list when
there is more than one security condi-
tion, press NEXT on the MKB (the
System displays the most recent
security condition first).
How to Individually Acknowledge a
Security Condition (UL 1076)
Press SEC ACK. The System ac-
knowledges the security condition
displayed and then displays the next
unacknowledged security condition.
If your System has a printer, it prints
an acknowledgment message
similar to the following:
ACK Security 1-5 12:01:28 Dec 31,20xx
#2 [custom message], [device type]
Note that the acknowledgment
message includes the term ACK to
indicate this security condition was
acknowledged.
Continue acknowledging security
conditions as explained above until
the System displays the following
message:
ALL SECURITY CONDITIONS
ACKNOWLEDGED
The SECURITY LED glows steadily
to indicate that all security conditions
are acknowledged, and the internal
audible goes silent.
If your System includes a printer,
it prints the following message:
ACK Security 12:05:44 DEC 31, 20xx
All Security Conditions Are Now Acknowledged.
Reset Procedures
Hard Reset
Other terms for Hard Reset are
Power-up, Initialization, and Cold
Reset.
Applying power to the System per-
forms a Hard Reset. Doing so initial-
izes the whole system.
What Is Lost:
Alarms, supervisories, troubles,
security conditions (provided they
have returned to the normal state).
Any user entries such as time and
date (MMB-1 only).
Arm/disarm.
Manual sensitivity adjustment.
Time-based control until time is
reset (MMB-1 only).
What Is
Not Lost:
CSG-M program.
Technical Manuals Online! - http://www.tech-man.com