1-10
Description
CSM-4 Signal Module
The CSM-4 Signal module controls two
supervised notification appliance
circuits. Each circuit is capable of
either Style Z (Class A) or Style Y
(Class B) operation. Each circuit can be
individually configured for notification
appliances, municipal tie, leased line,
or releasing service per NFPA 12A, 13
and 2001.
CRM-4 Relay Module
The CRM-4 Relay module is an output
control module that contains four relay
outputs. Form C contacts are rated at
2A, 30 VDC/120 VAC resistive.
CZM-4 Conventional Zone Module
The CZM-4 Conventional Zone module
provides four initiating device circuits
capable of Style D (Class A) or Style B
(Class B) operation. Each zone sup-
ports up to thirty two-wire detectors,
one linear beam detector or an unlim-
ited number of shorting devices. Each
zone has its own address. You can use
the CSG-M to write a custom message
for each zone (See the CSG-M Pro-
gramming Manual, P/N 315-090381).
CRM-4 Relay Module
CZM-4 Conventional Zone Module
CSM-4 Signal Module
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
