M - 1
Appendix M
New Two Stage Alarm
For use in Canada only with MXL software version 6.04 and higher
To satisfy the many requirements of
Canadian Two Stage alarm, this MXL
feature has been redesigned. The new
implementation of Canadian Two Stage
Alarm is available with revision 6.04 of
MXL firmware and revision 6.07 of
CSG-M. All new installations of Two
Stage Alarm should use the new
implementation. However, backwards
compatibility with the original Two
Stage Alarm has been maintained.
The hardware requirements for the
new Two Stage Alarm are as follows:
MXL firmware revision 6.04 or
higher
CSG-M revision 6.07 or higher
CSM-4s must contain revision 4 or
higher
The new Two Stage implementation is
designed for flexibility. It allows the
system designer/programmer to define
how Two Stage alarm should function.
Fire Protection Company Name
CSG-M Memory=2864 used, 243212 free CONFIG => TWOSTG
Other System Flags
Sensitivity Adjustments Allowed -----------------> NO
Block Alarm and Trouble Acknowledge Allowed -----> YES
Multienclosure System ---------------------------> NO
Device disarm through RESET ---------------------> NO
Self restoring troubles -------------------------> NO
NFPA 71 connection ------------------------------> NO
NET 7 panel checking ----------------------------> NO
Network Repeater Used ---------------------------> NO
Independent Function Keys -----------------------> NO
New Two Stage Configuration ---------------------> YES
Move Cursor to Select, ENTER to TOGGLE ESC = Prev. Menu
CSG-M Other System Flags Menu
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
