1-38
Description
Other
Devices
PE-3T Photoelectric Detector with
Heat Sensor
The PE-3T is a photoelectric detector
with heat sensor that responds to
a wide range of both flaming and
smoldering fire conditions. It uses
the DB-3S low profile surface
mounting base.
PE-11 Photoelectric Detector
The PE-11 is a photoelectric detector
that responds to a wide range of both
flaming and smoldering fire conditions.
It uses the DB-11 low profile surface
mounting base, the DB-3S base with
the DB-ADPT adapter, or the AD-11P/PR
air duct housing.
PE-11T Photoelectric Detector with
Heat Sensor
The PE-11T is a photoelectric detector
with heat sensor that responds to a
wide range of both flaming and smol-
dering fire conditions. It uses the
DB-11 low profile surface mounting
base or the DB-3S base with the
DB-ADPT adapter.
PBA-1191 Linear Beam Smoke
Detector
The PBA-1191 can detect light or dark
smoke buildup at distances between
the transmitter (X) and receiver (R) of
17 feet to 280 feet. The PBA-1191 can
be used in a variety of areas, including
large, narrow, or high rooms, and
rooms with high air turbulence. The
PBA-1191 requires the PBB-1191 base.
NOTE: Only one PBA-1191, and no
additional devices, can be connected
to a CZM-4 initiating zone.
LIM-1 Loop Isolator Module
The LIM-1 Loop Isolator Module
isolates short circuits on MXL analog
loops. By placing devices between
LIM-1s during installation, a short in
the wiring within that group is discon-
nected from the rest of the loop. The
remainder of the devices continue to
operate. The LIM-1 operates in both
Style 6 (Class A) and Style 4 (Class B)
circuits.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
