Siemens Cerberus PYROTRONICS MXL User Manual

3-19
Operation
If you release the keyswitch for less
than 5 seconds, you will not cancel the
paging operation. Lights remain on and
speaker zones remain connected to the
Page channel.
To cancel a page, press the zone
buttons of the selected zones. Or, do
nothing; the Page function will auto-
matically cancel after 2 minutes of
inactivity.
Telephone Call-Ins
A Telephone Call-in occurs when a
remote telephone is taken off-hook.
The call-in is indicated on the com-
mand console by a flashing red LED at
that telephones zone button and by
the sounding of a Call-in audible. To
connect the command console with
the remote telephone, press the
telephone zone button for that zone.
Then, press its Push-to-Talk button to
talk on the master telephone.
Select and deselect telephone zones in
your System that have called in by
pressing their zone selection buttons.
You cannot enable a zone that is not
calling in.
Phone Page and Wardens Page
You can use either the master tele-
phone or a remote telephone to page.
But the microphone will always
override a telephone. Thus, if a
remote telephone is being used for a
page, you can cut in with the micro-
phone to make an emergency an-
nouncement.
Paging with the master telephone is
the same as using the microphone. To
page from the master telephone:
 Press the button for the page
category that applies: ALL CALL,
SEL PAGE, PAGE TO EVAC, PAGE
TO ALERT, or PAGE TO OTHER.
 If applicable, press zone buttons
to select the zones to be paged.
 Press PHONE PAGE.
 Press the Push-to-Talk button on the
telephone and speak.
Paging from a remote telephone
(Wardens Page) is similar:
 Take the remote telephone off-
hook. The Call-in audible sounds at
the command console.
 Press that zones selection button to
enable the remote telephone.
 Press the button for the page
category that applies: ALL CALL,
SEL PAGE, PAGE TO EVAC, PAGE
TO ALERT, or PAGE TO OTHER.
 If applicable, press zone buttons to
select the zones to be paged.
 Press WARDENS PAGE.
 The person at the remote telephone
presses the Push-to-Talk button on
the telephone and speaks.
Voice Audible Silence
You can silence or unsilence all Voice
audibles, whether manual or auto-
matic, by pressing AUD SIL on the
MKB. You can individually silence
automatic activations by pressing the
zone buttons after the alarm is ac-
knowledged.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com

Siemens Cerberus PYROTRONICS MXL Specifications

General

Brand	Siemens
Model	Cerberus PYROTRONICS MXL
Category	Control Panel
Language	English