3-34
Operation
To obtain a full printed list of alarms in
the following formatone item for
each current alarm, press PRINT when
the A in Alarm is blinking:
Listing of all Alarms at 14:35:20 Oct 09, 20xx:
ALARM 1-5 14:34:22 Oct 09, 20xx
#1 [custom message], [device type]
In the previous listing, 1-5 is the
address of the device in alarm, the
time is the time the device went into
alarm, #1 is the number of this alarm in
the current list, [custom message] is
the custom message for the device in
alarm, and [device type] is the type of
device in alarm.
List: Supervsry
The List Supervsry function shows you
all the supervisories currently in the
System in the order they occurred.
If there is no supervisory, the Sys-
tem briefly displays the following
message and then returns you to the
List menu:
No Supervisory Exists
If there is at least one supervisory,
the System shows the most recent
supervisory, alternating between the
following two displays:
1-001 [custom message]
002 [device type] IN SUP
1-001 [custom-message]
002 [time/date] IN SUP
Press NEXT to show the two displays
for the previous supervisory in the
sequence. (Pressing HOLD freezes a
display for as long as you keep HOLD
depressed.)
When the System has shown all
current supervisories, it returns to the
List menu.
To obtain a full printed list of super-
visories in the following formatone
item for each current supervisory, press
PRINT when the S in Supervsry is
blinking.
Listing of all Supervisory at
14:35:20 Oct 09, 20xx:
SUPERV IN 32-45 14:34:22 Oct 09, 20xx
#7 [custom message], [device type]
In the previous listing, 32-45 is the
address of the device in supervisory, #7
is the number of the supervisory in the
current list, [custom message] is the
custom message for the device in
supervisory, and [device type] is the
type of device in supervisory.
List: Trouble
The List Trouble function shows you all
the troubles currently in the System in
the order they occurred.
If There Is No Trouble
If there is no trouble, the System
briefly displays the following message
and then returns to the List menu:
No Trouble Exists
If There Is a Trouble
If there is at least one trouble, the
System shows the most recent
trouble, alternating between the
following two displays:
1-001 [custom message]
002 [trouble type] IN TBL
1-001 [device type]
002 [time/date] IN TBL
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
