Additional functions
111
Step by Step
Selecting a base
If your handset is registered at multiple bases (cordless
systems), then you can set a specific base or the base
with the best reception as the base to be used. The
handset then switches automatically to this base.
You can change the base name that is displayed on the
handset at any time.
v Open the handset's main menu.
u v [ Select the menu icon and confirm.
st [ Select the menu item and confirm.
st [ Select the menu item and confirm.
st Select the required base.
Select base. The selected base is ticked:
• Base 1 - 4: Selecting base n defines one specific
HiPath cordless system where the handset is
registered.
• Best Base: If the handset is registered at multiple
cordless systems, it automatically switches to one
of these systems when it enters the relevant range.
Example: The handset is registered at the Gigaset
home base as well as at the cordless system in the
company.
Changing the base station name
You can change the name of the base station.
Press the display key.
X Delete text.
o and possibly X Enter the required text and correct individual characters
as necessary using the "Delete" display key.
Save the settings.
a Press the On-hook key to end the operation.
The new base station name is now displayed in idle
status.
To Next Page
Loading...
Need help?
General