Conducting calls – enhanced functions
63
Step by Step
Activating do not disturb
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [Select the menu item and confirm.
a Press the On-hook key to end the operation.
Deactivating do not disturb
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [Select the menu item and confirm.
a Press the On-hook key to end the operation.
Call charge display
After a call has ended, the display shows the
connection charges for the current call as standard. If
the costs are to be displayed continuously during an
outgoing call, this function must be requested from the
carrier.
You can check and display the call charges for your
phone number as a total for a period that can be set by
the service engineer.
First the call charges for the last charged call are
displayed. The total call charges are displayed after five
seconds.
This function can also be called directly by entering the
code page 145.
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
a Press the On-hook key to end the operation.
If a call is transferred, the costs are assigned to
the telephone to which the call was transferred
from this point onwards.
To Next Page
Loading...
