Safety notes
5
Compliance with BGR 139 (personal alarm
functionality)
Only for OpenStage M3 Plus and OpenStage M3 Ex Plus!
Notes:
• For BGR-compliant operation as a personal alarm signal device
with a voice communication capability (PNG-S), the handset
must operate in conjunction with an alarm server. Handset
operation without an alarm server is not BGR-compliant.
• The alarm functionality cannot be deactivated by the user.
Deactivation is only possible via a control call from the alarm
server.
• For compliance with BGR 139, the handset may only be
configured by specially qualified technicians. The PNG
configuration menu is PIN-protected to prevent unauthorised
configuration changes. The PIN should be kept secret.
Attention:
• The pre-alarm volume starts low and gradually rises until it
becomes very loud. Users should be aware of this.
• The battery pack must always be sufficiently charged for the
anticipated period of operation. The battery pack’s charging
capacity diminishes over its life. It should therefore be replaced
by specially qualified technicians when capacity levels become
insufficient (discharging accelerates over time). If necessary,
consult your safety officer.
To Next Page
Loading...
Need help?
General