Conducting calls – enhanced functions
45
Step by Step
System speed dialling
Your system administrator can save up to 1000 external
phone numbers as system speed dialling destinations
in your communications system. You can dial these
speed dialling destinations with a three-digit code (000
- 999).
Dialling a system speed dialling destination
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm. This function can
also be activated directly by entering the appropriate
code page 145.
o Enter the required code (3 digits, 000 - 999).
Dialling a system speed dialling destination with
suffix-dialling or a DID number
System speed dialling destinations can be saved in your
communications system and then dialled by means of
suffix-dialling or DDIA. These speed dialling
destinations let you enter an additional suffix-dialling or
DID number up to five seconds after entering the three-
digit service code. If you do not make an entry within
this time frame, the default suffix-dialling number,
forexample, "0" for the exchange, is dialled.
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [Select the menu item and confirm.
The saved speed dialling destinations and the
associated codes can be obtained from the
organisational unit responsible for administering
the communications system.
To Next Page
Loading...
Need help?
General