Siemens HiPath 3000 User Manual

Step by Step
Conducting calls – the basic functions
36
Confirm the message displayed with one of the two
display keys. The call is rejected and the caller hears the
busy tone. You are routed to the other party's mailbox
(if configured) or can program a callback request
 page 33.
Picking up a call in a call pickup group
You can use your handset to pick up calls to telephones
within your call pickup group (set by the service
engineer). This is also possible when you are
conducting a call.
Prerequisite:
You hear that a telephone in your call pickup group is
ringing.
c Press and hold down the Talk key. The message "Call
for:" appears on the display.
Open the system menu.
> < [ Select the menu item and confirm.
p You are conducting the call.
Ending a call
a or k Press the On-hook key briefly or place the handset in
the charging shell.
The call charges are displayed, depending on the
communications system.
Reject call
Menu
Group Pickup?

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English