Siemens HiPath 3000 User Manual

Putting the handset into service
20
Inserting the dummy plug or connector
Insert the dummy connector (1) / connector with cord (2) into the recess
provided. Make sure the dummy connector is positioned correctly.
If you do not require the man down alarm function on the
OpenStage M3 Plus or OpenStage M3 Ex Plus you can also use the
connector without a cord as a dummy connector.
Connecting a corded headset
You can connect a headset with a 2.5 mm jack plug to the left side of your
handset.
1. To do this, open the rubber cover using your finger nail and bend it
outward.
2. Insert the jack plug into the socket.
The headset volume corresponds to the setting for the earpiece volume
 page 121.
Regardless of whether or not a cord is used, the handset can be
placed with the connector inserted in the charger. Run the cord out
from the front of the charger.
1
2
Not for OpenStage M3 Ex and OpenStage M3 Ex Plus!
1
2

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English