Conducting calls – the basic functions
29
Step by Step
Conducting calls – the basic
functions
You can use your handset to make both internal and
external calls.
Internal calls are calls that
• you make within the range of a communications
system, for example, within your company,
• you make between networked communications
systems, for example, to different company
locations.
External calls are calls that you conduct with users of
the public telephone network.
Activating/deactivating the handset
a Press the On-hook key until the activation or
deactivation is confirmed by a signal.
PIN
If the default PIN has not been changed (0000), the
handset is ready for operation as soon as it is switched
on. If a PIN was set, it must be entered before the
handset can be operated.
o Enter the PIN.
[ Confirm your entry. The handset is ready to use.
Displaying the connection quality
The strength of the incoming signal is displayed by the
"receive field strength" icon in idle status:
The radio range is different indoors and outdoors
page 166. Please consult your system administrator
in the event of range problems.
| Flashing, no reception
Ò Low receive field strength
Ñ 50% receive field strength
i 75% receive field strength
Ð 100% receive field strength
To Next Page
Loading...
Need help?
General