Conducting calls – with multiple users
79
Step by Step
Placing a call on hold
You can interrupt a call temporarily if, forexample, you
want to talk to someone else in the room. The line is
placed "on hold".
p You are conducting a call.
Press the display key. The current call is placed "on
hold", the user waits.
Resuming the call with the waiting user
Either:
Open the system menu.
> < [ Select the menu item and confirm.
You are reconnected to the partner.
Toggling (switching between calls)
The Toggle function allows you to switch between two
users without allowing them to speak to each other
directly. The two users can be either external or internal
users. You can also withdraw from the calls and connect
the two users with each other. You can also start a
conference.
p You are conducting a call.
Press the display key. The current call is placed "on
hold", the user waits.
o Enter the phone number of the second user.
p The second user answers.
Press the display key to switch between the two calls.
When you end the call, both users are still connected
(only possible with 2 external users if the "Transit"
feature is activated by your service engineer).
To Next Page
Loading...
Need help?
General