149
Step by Step
Personal alarm functionality
The OpenStage M3 Plus and OpenStage M3 Ex Plus
handsets are equipped with a sensor that allows them
to be operated as a PNG-S.
These handsets are referred to below as personal alarm
devices with voice communication capability, or by the
abbreviation PNG-S.
Alarm statuses
Integrated sensors detect alarm statuses such as:
• Non movement
• Position detection (deviation from the upright
position, e.g. the person has fallen)
• Intense motion (escape)
• Cyclical response monitoring (timed)
• Loss of PNG-S (via pull-away contact with cord)
Terms
Operating modes
The OpenStage M3 Plus and OpenStage M3 Ex Plus
handsets can be used as personal alarm devices with
voice communication capability (PNG-S) in Alarm Mode
and PNG Mode. Various settings are performed on the
handset for this purpose, which enable automatic or
manual alerting.
The configuration may only be performed by
appropriately trained service personnel for professional
use (e.g. in accordance with BGR 139).
A service PIN is used to protect mode activation from
unwanted changes by third parties.
The configuration of the operating modes is described
in a separate service manual.
To Next Page
Loading...
