Step by Step
Telephone blocking
142
Battery charging when PIN lock active
If the handset deactivates because the battery is flat, it
automatically reactivates as soon as you place it in the
charging shell. The charging operation starts. If you
have already set a PIN, you must enter it so that the
handset can receive calls.
Telephone lock code programming
You can protect your handset against unauthorised
access (thereby safeguarding personal data) by entering
a 5-position code to lock and unlock it.
To change a code, first enter the old code and then key
in the new code twice.
c or d Press and hold the Talk key or press and hold the
Speakerphone key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
o Enter the old code (5 digits, default "00000").
o E n te r th e new P I N, for exa m pl e , 11111 ( 5 d i gi t s ) .
o Re-enter the new PIN.
a Press the On-hook key to end the operation.
If you have forgotten your PIN, contact your
service engineer for help. He will be able to
reset your PIN to "00000".
It is also possible to open your handset from a
central station, for example, from the attendant
terminal.
To Next Page
Loading...
Need help?
General