Step by Step
Setting the handset
136
You can activate and deactivate the automatic position-
dependent rotation of the information on the display.
When activated, the display is rotated by 180° (upside
down) in non movement and call statuses when you
move the handset from a vertical to a horizontal
position.
This setting is useful if you are wearing the handset on
a belt and you would like to see the display in the event
of an alarm or call without having to remove the handset
from the belt. You can then read the information on the
display by simply tilting the handset outwards.
v Open the handset's main menu.
u v [ Select the menu icon and confirm.
st Select the menu item.
Press the display key.
(
³=on).
To Next Page
Loading...
