Siemens HiPath 3000 User Manual

Appendix
164
The following, for
example, appears:
Base 1
Outgoing and
incoming calls and
activation/deactivation
are not possible.
Handset is blocked. Remove the batteries
from the handset and
then re-insert them.
Proceed as when loading
batteries for first time
 page 19.
The following appears:
incomplete
Maximum input time
was exceeded.
Avoid long pauses
between keystrokes.
The On-hook key was
not pressed.
Press the On-hook key.
The following appears:
incomplete
The communication
system is overloaded.
Wait and try again later.
The following appears:
Currently not
available
Function is currently
not available.
Wait and try again later.
No connection available
for the phone number
dialled.
Enter the phone number
correctly or call the
attendant console.
The following appears:
Not possible
or:
Incorrect entry.
or:
Key not
programmed.
Speed-dial number not
available, appointment
entered incorrectly,
entry blocked or not
allowed, prerequisite
not fulfilled (for
example if there is no
second partner for
toggling), number
dialled was incomplete.
Correct your input,
select a permitted
option, enter the phone
number in full.
The following appears:
no access
Blocked function was
called.
Apply to the relevant
service personnel for the
COS for the blocked
function.
The following appears:
PIN incorrect
Incorrect PIN was
entered.
Enter the correct PIN.
The following appears:
not available
Phone number was not
fully entered, the star or
hash key was not
pressed.
Enter the phone number
correctly or as
prescribed.
The following appears:
protected
Data transfer is active. Wait and try again later.
Error Possible cause Remedy

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English