Conducting calls – enhanced functions
65
Step by Step
Using the handset to open the door opener during
a call
> < [Select the menu item and confirm.
Using the handset to open the door opener without
holding a conversation
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
o Enter the internal phone number for the door opener.
The door is opened.
a Press the On-hook key to end the operation.
Activating the door release
This function only works if it has been configured by the
service engineer.
c or d Press and hold the Talk or Speakerphone key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
o Follow the user guidance system from this point
onwards. Enter the internal phone number of the door
opener, as well as the code and type of door release:
• 1=enable with ring,
• 2=enable w/o ring,
• 3=change password.
[ Confirm your entries.
a Press the On-hook key to end the operation.
Standard code 00000. To change the code,
confirm option "3=change password". Follow
the user guidance system.
To Next Page
Loading...
