Issue 10/06 5 MICROMASTER 440 specifications
MICROMASTER 440 Operating Instructions
6SE6400-5AW00-0BP0
263
Feature Specification
Serial Interface RS485, optional RS232
Electromagnetic Compatibility Frame Sizes A to C: optional class A or B filters available according to
EN55011
Frame Sizes A to F: inverter with integrated class A filter available
Frame Sizes FX and GX: With EMI filter (available as an option) the limiting
values of the EN 55011, Class A are fulfilled for
conducted emission.
(line commutating choke required)
Braking DC braking, compound braking
Dynamic braking Frame Sizes A to F with integrated chopper
Frame Sizes FX and GX with external chopper
Protection Level IP20
Temperature range
Frame Sizes A to F: -10 °C to +50 °C (14 °F to 122 °F) (CT)
-10 °C to +40 °C (14 °F to 104 °F) (VT)
Frame Sizes FX and GX: 0 °C to +40 °C (32 °F to 104 °F),
up to 55 °C (131 °F) Power reduction see Figure 2.2
Storage Temperature
-40 °C to +70 °C (-40 °F to 158 °F)
Humidity < 95 % RH – non-condensing
Operational Altitudes Frame Sizes A to F: Up to 1000 m above sea level without derating
Frame Sizes FX and GX: Up to 2000 m above sea level without derating
Protection Features Undervoltage , Overvoltage, Overload, Ground Faults, Short circuit, Stall
Prevention, Motor Blocking Protection, Motor Overtemperature, Inverter
Overtemperature, Parameter Interlock
Standards Frame Sizes A to F: UL, cUL, CE, C-tick
Frame Sizes FX and GX: UL, cUL, CE
CE Marked Conformity with EC Low Voltage Directive 73/23/EEC
and filtered versions also Electromagnetic Compatibility Directive 89/336/EEC
To Next Page