Siemens SICAM Q100 7KG95 Series - Page 201

9 Operation at Use of a PC
9.3 Configuration of the Device
201SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
A new file is created after a PQDIF file has been completely recorded.
Figure 9-49 Creating PQDIF Files of the Measured Value Recorder
11:00 11:10
12:00 Time
11:00 11:10
12:00 Time
11:00 11:10 12:00
Time
11:15 11:30
11:40
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF file
…
The device
shut down
The device
turn on again
The device
shut down
The device
turn on again
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF file
…
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF file
…
12:10
Data (recording status)
MAN_SICAM_Q100_US.book Page 201 Wednesday, June 5, 2019 9:31 AM