9 Operation at Use of a PC
9.3 Configuration of the Device
257SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Settings for Binary Outputs in the SICAM I/O Unit
To change the outputs of a binary output, proceed as follows:
✧ In the navigation window, select the Operational parameters menu, then the Process connections
submenu and click Binary outputs.
Figure 9-80 Configure Tab, Binary Outputs of SICAM I/O Unit Input/Output Window
Table 9-40 Settings of the Binary Outputs in the SICAM I/O Unit Subdevice
Parameter Default Setting Setting Range
Indication
(can be set individually for all relay outputs)
-none- See Device Manual
SICAM I/O Unit 7XV5673
Source inverted
(can be set individually for all relay outputs)
no no
yes
Operating mode
(can be set individually for all relay outputs)
Persistent See Device Manual
SICAM I/O Unit 7XV5673
MAN_SICAM_Q100_US.book Page 257 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
