Siemens SIMADYN D User Manual

Communications configuring
System- and communication configuring D7-SYS - SIMADYN D 3-45
Edition 12.2003
Max. number /
max. data quantity /
sampling time
not have any other acknowledge mechanism (handshake mechanism)!).
Table 3-22 Data quantities, sampling times
3.4.7 NML network management
The configuring tool NML is required to configure the data transport
connections and application associations, Order No. 6GK 1740-0AB00-
0BA0.
Further information
on the NML configuring tool, refer to the user documentation
"SINEC NML - CP141x, CP1470".
• When configuring for layer 2 or layer 4, the "CSH11_E4_2000" profile
should be used. If this is not available for the NML version supplied,
then please contact Siemens AG who will then provide you with it.
− profiles to be imported: "Mgt-Tbez.", "e4_handshake"
− function distribution table to be imported: "CSH1 SINECTF00".
• For layer 4 operation, data transport (data transfer) connections must
be configured. The "e4_handshake" is recommended as profile.
• Both layer 2 as well as also layer 4 operation must be assigned to the
existing (standard) application associations of FVT "CSH1 SINEC
TF00", under the menu item "Application associations" "FVT
assignment"..
General
information
Configuring

Siemens SIMADYN D Specifications

General

Brand	Siemens
Model	SIMADYN D
Category	Control Systems
Language	English