Communications configuring
System- and communication configuring D7-SYS - SIMADYN D 3-145
Edition 12.2003
Serial interface Switch
X01 S1/1 and S1/2
X02 S1/3 and S1/4
3.13.6.2 Initialization
You must configure the @USS_M function block so that you can initialize
the USS master coupling.
3.13.6.3 Broadcast
You may configure precisely 2 broadcast senders. If you configure more
than 2 broadcast senders, then these will not go into operation.
If the maximum of 2 possible broadcast tasks are present, then these are
sent precisely after one bus circulating time.
3.13.7 Literature
/1/ Specification "Universal serial interface protocol (USS
protocol)
Order No.: E20125-D0001-S302-A1 Version: 09.94
Bohrer/Möller-Nehring ASI 1 D SP3
/2/ EMC Guidelines
refer to the User Documentation SIMADYN D, hardware
To Next Page
Loading...
Need help?
General
